Printoo is a modular platform specifically designed for printed electronics components. At its core is a high performance, low power 8-bit AVR ATMega328 microcontroller. Below is a list of the various modules and components that make part of Printoo. Pictures are of Printoo in prototyping stages, the final product may still have slight alterations.
Printoo Core Module
Operating Voltage: 1.8 - 5.5 V
Flash Memory: 32 kB
SRAM: 2 kB
EEPROM: 1 kB
Clock Speed: 16 MHz
For the full technical specifications, please consult the microcontroller datasheet.
Physical Characteristics
Printoo board has approximately 35 mm x 35 mm (1.38 inch x 1.38 inch) in length and width, and has less than 2 mm (0.08 inch) of thickness. The board itself weighs 4 g.
Programming
Printoo is fully compatible and programmable with the Arduino IDE (download). The ATmega328 microcontroller on the Printoo board comes pre-burned with a bootloader that allows you to upload new code into it with the Arduino IDE.
Ynvisible Display Driver
- 8-bit Serial-In/Parallel-Out (SIPO) shift register operation (Libraries for Arduino in development)
- 2 Electrochromic (EC) displays can be connected (max 2×8 bit per module)
- Serial out for cascade functionality
Printed Battery Connector
- 2x 1.5V printed battery (in series)
- Enfucell and Bluespark batteries can be connected
- For low power applications
Sensor Module
- Accelerometer – 3-axis analog output
- Light Sensor (Phototransistor)
- Temperature sensor (NTC) – 10kΩ
- Button
Solar Cell Connector
- Battery and solar panel connectors
- Battery management IC
- 3.3V regulator for the ATmega
DC Motors Drivers
- Connection for 2 motors
- 2 H-bridge modules controlled by 2 PWM outputs from Core Module
- 2A polyfuse (max motors driving current is 2A)
Blue Spark Ultra-Thin Battery
Enfucell Soft Battery
Technical Specifications
(Enfucell is manufactured by Xymox in North America)
ISORG Organic Photodetector Slider
Mekoprint Polymer Solar Cell